TM 5-6675-331-14&P
3-14. FLUORESCENT CEILING LAMPS.
This task covers:
a. Remove
b. Replace
INITIAL SETUP:
Tools:
Screwdriver (Appendix C, Item 27)
Screwdriver (Appendix C, Item 28)
Equipment Conditions:
Incandescent Light on
a. Remove.
WARNING
Ensure shelter light circuit breaker is off. Failure to do so may result in death or serious injury.
1.
Turn off shelter light circuit breaker.
2.
Loosen 4 screws (1) and remove diffuser panel (2).
3.
If outer light tubes (3) are not lighting, disengage safety clamps (4) and remove defective tube by rotating.
4.
If center tube is not working, loosen 4 screws (5) securing diffuser panel mounting brackets (6).
5.
Rotate brackets (6) away from light tube.
6.
Disengage safety clamps (4).
7.
Remove defective tube by rotating.
3-7
