TM 5-6675-325-14
c.
d.
e.
f.
g.
h.
Remove retaining screws. Tag and desolder wiring.
Press retaining tabs together and remove defective switch in front of
control panel.
Press retaining tabs together and install new switch in front of
control panel.
Solder wiring in proper order.
Reinstall control panel to projector, and secure with socket head
screws.
Plug in power cord.
4-16.3 Replace Rectifying Limit Switch(es).
MOS:
41B, Topographic Instrument Repair Specialist
TOOLS:
Flat Tip Screwdriver
5/16 in. Combination Wrench
SUPPLIES: Limit Switch(es)
a.
Turn POWER switch on.
Position copy easel as follows:
(1) Raise copy easel to top position for Y-axis switch replacement.
(2) Lower copy easel for X-axis switch replacement.
4-30
