g.
h.
i.
j.
k.
l.
m.
TM 5-6675-325-14
Remove and replace motor(s). Be sure that chain and sprocket mesh.
Assemble and tighten mounting hardware.
Adjust sprocket(s) and tighten setscrew.
Reconnect electrical wiring.
Reinstall rear panel.
Plug in and test operation.
Unplug power cord.
Reinstall on mounts.
3-16.16 Remove/Install Microfiche Reader-Printer
MOS: 41B, Topographic Instrument Repair Specialist
TOOLS: 7/16 in. Socket with 1/2 in. Drive
9/16 in. Socket with 1/2 in. Drive
3/4 in. Combination Wrench
1/2 in. Drive
SUPPLIES: Microfiche
a. Unplug microfiche
Ratchet
Reader-Printer
reader-printer; coil and tape cord.
b.
c.
d.
Deflate shock mounts.
Remove bolts and washers to shock mountings.
Lift reader-printer for access to underside; then remove bolts and
washers holding mounting plate to defective reader-printer.
3-89