TM 5-6675-325-14
d. Loosen idler nuts.
e.
Adjust idlers until timing belt deflection is .18 in. (4.76 mm) at
point opposite idler. Tighten idler nuts.
f. Plug in power cord. Switch reader-printer ON.
g.
Cycle reader-printer.
Check that paper moves smoothly off printing
easel and through exit slot. Readjust if required.
h. Switch reader-printer OFF. Unplug power cord.
i .
Remove disabling device from interlock.
j .
Close lower right side panel.
k. Plug in power cord.
3-87
