Replace Drive Motor(s)

Remove/Install Microfiche Reader-Printer MOS: 41B, Topographic Instrument Repair Specialist TOOLS: 7/16 in. Socket with 1/2 in. Drive 9/16 in. Socket with 1/2 in. Drive 3/4 in. Combination Wrench 1/2 in. Drive SUPPLIES: Microfiche a. Unplug microfiche Ratchet Reader-Printer reader-printer; coil and tape cord. b. c. d. Deflate shock mounts. Remove bolts and washers to shock mountings. Lift reader-printer for access to underside; then remove bolts and washers holding mounting plate to defective reader-printer. 3-89

TM-5-6675-325-14 Topographic Support System Paper Conditioning Section Model ADC-TSS-15 NSN: 3810-01-105-6442 Manual
Page Navigation
230

TM 5-6675-325-14 3-16.15 Replace Drive Motor(s). MOS: 41B, Topographic Instrument Repair Specialist TOOLS: Socket Head Key Wrench Set 1/4 in. Combination Wrench 3/8 in. Combination Wrench SUPPLIES: Mirror Drive Motor Developer Drive Motor Paper Drive Motor WARNING Death or serious injury may occur from electrical shock unless power cord is unplugged before servicing. a. Unplug power cord. b. Remove reader-printer from mounts. c. Remove rear panel. d. Tag and disconnect e. Loosen setscrew on f. Remove drive motor electrical wiring to motor(s). chain drive sprocket(s). mounting hardware. 3-88

Privacy Statement
Press Release
Contact