TM 5-6675-325-14
e.
Remove defective transformer, terminal block, and associated wiring as a
unit.
f. Tag and disconnect wires from terminal block to defective transformer.
Connect new transformer to terminal block.
power cord to rear of reader-printer.
reader-printer on mounting plate.
g.
Install new transformer, terminal block and associated wiring as a unit.
h. Reinstall rear panel.
i.
Reconnect
j.
Reinstall
k. Plug in power cord.
3-16.7 Adjust Secondary Mirror.
MOS: 41B, Topographic Instrument Repair Specialist
TOOLS:
Flat Tip Screwdriver
Alinement Aperture
SUPPLIES: Secondary Mirror Adjustment Template
Painter’s Masking Tape (Item 29, Appendix E)
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
3-70
