TM 5-6675-325-14
Table 3-3. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
PAPER ERROR LIGHT COMES ON DURING PRINT CYCLE.
Step 1. Check
touch
(a)
(b)
7.
FOCUS WHEEL IS
Step 1. Check
(a)
(b)
Step 2. Check
position of optical sensors on paper guide rails. Paper must
sensors during operation.
If paper does not touch sensors, adjust optical sensors
(paragraph 3-16.4).
Refer to direct/general support troubleshooting.
DIFFICULT TO ADJUST.
for binding between focus wheel and focus wheel bearing.
If no binding is noted, proceed to step 2.
If binding is noticeable, lubricate bearing with general
purpose lubricating oil (Item 14, Appendix E).
operation of lens sleeve in trunnion.
(a) If no binding is noted, proceed to step 3.
3-52
