TM 5-6675-325-14
Table 3-3. ORGANIZATIONAL TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
LIGHT BAR ACROSS TOP OF VIEWING SCREEN.
Check adjustment of secondary mirror.
Adjust secondary mirror (paragraph 3-16.7).
5.
PARTIAL OR NO PAPER DRIVE.
Step 1.
Inspect that drive rollers are correctly engaged.
(a) If drive rollers are engaged, proceed to step 2.
(b) If drive rollers are not engaged, engage rollers.
Step 2.
Remove paper drive roller, and check for slippage of plastic end
caps.
(a) If no play is present, proceed to step 3.
(b) If caps show signs of slippage, reglue caps to roller.
Step 3.
Check for proper light shield alinement at top roller.
(a) If light shield is properly alined, proceed to step 4.
(b) If light shield presses on top roller when reloading door is
closed, adjust light shield by bending away from loading door.
Step 4.
Test rollers for freedom of rotation.
(a) If rollers are free, proceed to step 5.
(b) If rollers are not free, lubricate roller shaft bearing with
general purpose lubricating oil (Item 14, Appendix E).
3-50
