TM 5-6675-324-14
Table 3-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. HORIZONTAL FOG STRIPE(S) - Cont
Step 4.
Binding in cleaner drive system.
Replace cl caner assembly gears (paragraph 3-20.53).
6.
DIRTY BLANK STRIP.
Step 1.
Developer assembly felt side seals are incorrectly positioned.
Replace felt side seals (paragraph 3-20.30).
Step 2.
Gap is 'between side scraper and side seal on developer assembly.
Replace side seal (paragraph 3-20.30).
Step 3.
Developer assembly side seals are worn.
Replace side seals (paragraph 3-20.30).
Step 4.
Separation belt assembly is dirty.
Clean belt (Table 3-4, PMCS 5).
Step 5.
Developer leaks onto preconditioning, primary, and secondary coronas
from cleaning assembly.
(a) Clean coronas (Table 3-2, PMCS 2).
(b) Adjust blade pressure (paragraph 3-20.50).
(c) Reseat side seal (paragraph 3-20.54).
3-106
