TM 5-6675-324-14
Table 3-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
LIGHT IMAGE (MAY HAVE FAINT VERTICAL AREAS).
Step 1.
Developer is low.
Refill hopper (paragraph 3-6.2.1).
Transfer corona assembly is not seated correctly.
Step 2.
Reseat transfer corona.
Paper has high moisture content.
Step 3.
Replace paper.
Incorrect output from high-voltage transformer.
Step 4.
(a) Replace high-voltage cable connector (paragraph 3-20. 11).
(b) Replace high-voltage transformer (paragraph 3-20.19).
Primary and secondary corona grid wires are dirty.
Step 5.
(a) Clean grid wires (Table 3-2, PMCS 2).
(b) Adjust height of primary corona (paragraph 3-20.40).
Exposure reflector is dirty.
Step 6.
Clean reflector (Table 3-4, PMCS 9).
Fiber lens array is dirty.
Step 7.
Clean lens (Table 3-4, PMCS 1).
3-101
