TM 5-6675-324-14
Table 3-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
LIGHT IMAGE (MAY HAVE FAINT VERTICAL AREAS) - Cont
Developing assembly not mounted correctly.
Step 8.
Mount assembly correctly.
Developing bias is faulty.
Step 9.
(a) Check contacts of connector.
(b) Replace high-voltage transformer (paragraph 3-20.19).
Step 10. Halogen lamp intensity is too low.
Perform halogen lamp intensity adjustment (paragraph 3-20.3).
Step 11. Moisture is on drum.
(a) Wipe drum. (Table 3-4, PMCS 8).
(b) Keep power cord connected to outlet when copier is not in use.
2. FOGGED IMAGE.
Preconditioning exposure reflector is dirty.
Step 1.
Clean reflector (Table 3-4, PMCS 9).
Primary corona height is incorrect.
Step 2.
Adjust corona height (paragraph 3-20.40).
3-102
