TM 5-6675-324-14
Attach copy tray.
a.
b. Attach manual paper feed tray.
c.
Check that power cord is plugged into electrical outlet.
d. Slightly lift cassette and pull it out of copier.
e. Remove cassette cover and fill with 8.5 in. X 11 in. (21.6 cm x 27.9 cm)
paper.
f. Reinstall cassette cover.
3-6.2 Operation Procedures.
NOTE
Copier remains in wait mode for approximately 3 min after it is switched
WAIT/STANDBY indicator flashes if fuser roller is below 356F
(180C). Copying is not possible during this time.
Standby mode is reached when fuser roller reaches 356F (180C). WAIT/
STANDBY indicator glows steadily.
a.
Set power switch to 1 (ON).
(1) WAIT/STANDBY indicator flashes.
(2) Copy number display indicates 1.
3-47