TM 5-6675-323-14
(10) Loosen rocker tension arm nut with 3/16 in. nut driver until cable
tension is fully released.
(11) Unhook cable loop from lower left stud.
(12) Unhook cable from tension arm.
(13) Remove defective Y-cable from pulleys and motor.
e.
Install new Y-cable:
(1) Turn Y-drive motor pulley so that pin hole is directly up.
(2)
Secure Y-drive motor in this position with tape so that it will not
turn.
(3) Unwind new Y-drive cable taking care not to kink.
3-302
