TM 5-6675-323-14
(1) Unscrew two hood retaining screws and remove rear hood.
(2) Raise upper deck.
S w i n g latching bar up and engage it securely in
retaining slot.
c.
Manually position plotting arm over deck lock assembly, and secure
arm using two thumbscrews from service kit or 6/32 in. screws.
d.
Remove Y-cable:
(1) Disengage latching bar and lower the upper deck.
(2) Place pen carriage to center of plotting arm.
(3) Remove pen carriage cover by removing pen carriage cover screw.
3-300
