TM 5-6675-319-14
c .
Remove side mounting screws and remove detector assembly.
d. To replace detector microswitches, proceed as follows:
(1) Remove
(2) Remove
(3) Remove
cover screws and cover.
nut and washer from detector roller .
d e f e c t i v e s w i t c h.
(4) Tag and disconnect wiring from defective switch.
(5) Reconnect wiring to new switch.
(6) Install new switch into detector assembly and retain with nut and
washer.
(7) Reinstall detector cover and proceed to step v.
e.
Remove screws and film guide shoe.
f. Remove nuts from ends of tie rods.
2-133
