TM 5-6675-319-14
2-20.1 Repair Detector Crossover Assembly
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Flat Tip Screwdriver
7/16 in. Combination Wrench
SUPPLIES: Switch
Gear
Bearing
Upper Roller Assembly
Lower Roller Assembly
NOTE
The following procedure is in disassembly/assembly sequence. Disassemble
the detector crossover only as far as necessary to perform the repair.
a.
Turn off all processor and pump switches.
b. Disconnect power cable and remove detector crossover assembly from
p r o c e s s o r.
2-132
