TM 5-6675-318-14
CAUTION
D o not touch dashpot piston with bare hands. Skin oils will damage surface
of piston.
(4) Tape pen carriage top and dashpot securely together to prevent any
parts from getting lost.
( 5 ) Remove screw from dashpot assembly.
(6) Carefully swing dashpot and pen carriage away from pen arm.
(7) Pull up trailing cable tray cover.
(8) Move trailing cable wires away from two nuts on pen carriage
assembly. Remove two nuts from top of pen carriage assembly.
(9)
Lift trailing cable termination bracket off threaded studs. Tape
down carefully to plotter arm. Reinstall two nuts over pulleys
finger tight.
3-301
