TM 5-6675-318-14
(c) Position paper squarely against ridge at bottom of platen and
a g a i n s t p a p e r s t o p o n l e f t s i d e . S m o o t h paper with back of hand.
(d)
P r e s s CHART HOLD switch. (CHART LOAD should go off).
(10) Load pens.
WARNING
T o avoid possible i n j u r y t o f i n g e r s , a l w a y s t u r n p l o t t e r o f f w h e n d i r e c t l y
storing pens.
(a) Turn off (0) LINE power switch.
(b) Remove cap from first pen.
(c) Place tip of pen in boot at base of stable.
(d) Gently press pen down and in until it snaps in place.
(e) Repeat for all four pens.
(11) Perform four-color dynamic test.
(a) Insert 9800 series test cartridge into computer.
( b ) L o a d t e s t c a r t r i d g e b y pressing STOP, ERASE, A, EXECUTE, RESET,
l b d 3 , and EXECUTE.
( c ) When computer displays ENTER MODEL # TO BE TESTED, press 9872,
SHIFT, A, and CONTINUE.
( d ) When computer displays ENTER SELECT CODE . . . . . , press 705 and
CONTINUE.
( e ) When computer displays ENTER # OF TIMES TO RUN TEST . . . , press 1
and CONTINUE.
( f ) W h e n c o m p u t e r d i s p l a y s LOAD PAPER & THEN PRESS CONTINUE, check that
p a p e r is loaded and press-CONTINUE. -
( 9 ) P r i n t e r s h o u l d p r i n t 9872B PLOT COMPLETE in approximately 6
C o m p a r e plot produced.
minutes.
3-63
