TM 5-6675-316-14
NOTE
Point should not contact surface when in rest position.
(5) Position point by grasping and moving tool holder platform and X-and Y-
carriages.
NOTE
For extremely accurate point positioning, fine adjustment devices should
be used to control carriage positions.
(6) Place input values desired into XY display.
(7) When point is positioned at beginning of line, engage (guide pin in notch
on collar) tool.
NOTE
If diagonal lines are required, a straightedge may be used.
(8) Keeping point in contact with medium, draw line by pushing tool in
desired direction.
Use XY display to guide positioning and/or length of line being
drawn.
If line is to be drawn in X-or Y-direction, unused carriage must be locked
in place.
3-75
