TM 5-6675-316-14
Table 7-2. TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
LAMPS DO NOT LIGHT.
Step 1.
Step 2.
Step 3.
Check that power switch is ON.
(a) If power switch is ON, proceed to step 2.
(b) Turn on power switch.
Check that power cord is plugged
(a) If power cord is plugged i
(b) Plug in power cord.
Visually check fuse for broken fi
in.
n, proceed to step 3.
lament.
(a) Replace fuse (paragraphs 7-10. 1).
(b) If filament is not broken, refer to organizational
maintenance.
2.
TABLE DOES NOT LOCK.
Check for loose tilt lock.
(a) If loose, tighten.
(b) If tight, refer to organizational maintenance.
7-13
