TM 5-6675-316-14
Table 7-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS
AND SERVICES - Cont
A- After
ITEM
NO.
B - Before
W - Weekly
AN . Annually
(Number) - Hundreds of Hours
D. During
M - Monthly
s
- Semiannually
Q - Quarterly
BI
- Biennially
1
7-8
IN-
TER-
VA L
B/A
ITEM TO BE INSPECTED
PROCEDURE
DRAFTING, SCRIBING/TRACING TABLE - Cont
Inspect - Cont
3.
Pull cabinet assembly lock release ring and
swing out cabinet assembly.
4.
Loosen tilt lock until it clears table
top assembly.
5.
Rotate table top 180°.
6.
Tighten tilt lock to secure table top assembly
in position.
7.
Inspect wooden table top.
8.
Rotate table top 180° and tighten tilt lock.
9.
Return cabinet assembly to its normal
position under table.
10.
Press firmly on cabinet assembly front
until cabinet assembly lock clicks.
11.
Turn power switch ON. Be sure all table
lights are on.
Check surface for cracks
or breaks.
12.
Turn power switch OFF.
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
Tilt lock is
damaged.
Table top does
not rotate.
Table top will
not lock in
position.
Table top has
gouges, dents,
or cuts.
Table lights do
not illuminate.
Glass is
broken. Power
switch is
broken.
