TM 5-6675-316-14
Table 7-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W . Weekly
AN - Annually
D - During
M - Monthly
s
(Number) - Hundreds of Hours
- Semiannually
A - After
Q . Quarterly
BI - Biennially
2
lN-
TER-
VAL
B
ITEM TO BE INSPECTED
PROCEDURE
DRAFTING, SCRIBING/TRACING TABLE - Cont
Service - Cont
4.
5.
Rotate table
is on top.
Tighten tilt
top assembly until gl
lock to secure table
position.
ass surface
top assembly in
Do not use abrasive cleaner
Do not use running water or
on cloth.
Use moist cloth.
will scratch glass surface.
cause equipment damage.
on glass surface.
excessive water
Abrasive cleaner
Excessive water can
6.
Wipe glass surface with cheesecloth moistened
in mild solution of detergent and water.
7.
Wipe glass surface with dry cheesecloth to
remove streaks and smears.
8.
Swing cabinet assembly to its normal position
under table.
9.
Plug in power cord.
For Readiness
Reporting,
Equipment Is
Not Ready!
Available If:
Table top
does not
rotate.
7-10
