TM 5-6675-316-14
Y.
Reinstall film rollers.
Secure with screw on end of each film roller.
z.
Plug in power cord and turn power on.
aa.
Adjust light grid intensity (paragraph 4-19.1).
ab.
Reinstall front cover on power panel and tighten two screws.
ac.
Collimate split-stage light table (paragraph 4-20.12).
4-20.12 Collimation.
MOS:
41B, Topographic Instrument Repa
TOOLS:
Autocollimator
Adjustable Wrench
9/64 in. Flat Tip Screwdriver
NOTE
ir Specialist
. Make sure that all attaching hardware is tight before attempting to
collimate split-stage light table.
. Collimation should be performed after movement to new site or when tests
indicate collimation is required.
a.
Mount autocollimator in optical mount.
4-77
