TM 5-6675-316-14
4-20.10 Replace Fan.
MOS:
41B, Topographic Instrument Repair Specialist
TOOLS: 9/64 in. Flat Tip Screwdriver
5/16 in. Open End Wrench
Wire Cutters
SUPPLIES: Fan
Wire Ties
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Turn power off and unplug power cord.
b. Loosen screws and remove connector from below fan.
c.
Remove quick disconnect from power panel.
d. Remove main power switch from backplate by releasing switch from bezel
retaining clip.
e.
Remove screws from main power switch backplate.
f. Lower power panel.
4-72
