TM 5-6675-315-14
NOTE
There are four bolts securing flange, but only three lock washers.
i.
Remove cutter flange.
j.
Remove two funnel screws.
k.
Remove hex head screws, stud bolts, and top plate.
l.
Remove bushing, ring, and special spacer ring from both cutter and comber shafts.
NOTE
All cutter and comber assemblies consist of two combers except the last installed assembly,
which consists of three combers. Remaining components consist of one cutter ring, special
spacer ring, ring, and bushing. Two cutter blades are contained in each assembly, except the
last installed assembly on the lower cutters which consists of four blades.
2-238
