TM 5-6675-315-14
h.
Remove conveyor belt guides.
i.
Remove conveyor belt assembly.
j.
Stand conveyor belt assembly on side and slip defective belt and rollers from assembly.
k.
Install new belt with rollers on conveyor belt assembly.
NOTE
The conveyor belt must be squarely alined with forward edge of cutter head.
l.
Reinstall conveyor belt assembly in machine.
m.
Reinstall conveyor belt guides.
n.
Reinstall nuts on right and left side support brackets
.
o.
Reposition sprocket plate.
p.
Reinstall drive sprocket and chain and secure with nut and hex head setscrew.
q.
Reinstall right and left conveyor side cover plates.
r.
Reinstall upper and lower covers.
s.
Adjust conveyor belt (paragraph 2-35.1).
t.
Turn on circuit breaker.
u.
Turn on main power switch.
2-236
