TM 5-6675-315-14
NOTE
Tag each wire, when removed, with the letter or number of the terminal it came from. This will
aid in reconnecting proper wire to correct terminal on reinstallation.
l.
Locate main power cable input to relay box.
m.
Disconnect wires from terminals R, S, T, and GROUND, tagging each wire as removed with its location.
n.
Using electrical tape, tape each exposed wire end so no bare wire is showing.
o.
Tape the four taped wires together with a few tape wraps so they do not separate.
p.
Remove outside nut on main power cable.
q.
Remove main power cable from relay box.
r.
Remove power cable from bottom of machine.
2-130
