TM 5-6675-315-14
2-16.21
Remove/Install Shredder-Bagger.
MOS: 83FJ6, Reproduction Equipment Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
Flat Tip Screwdriver
15/16 in. Combination Wrench
Flat Tip Screwdriver, 1/64 in., 2 in. Ig.
1/2 in. Combination Wrench
12 in. Adjustable Wrench
SUPPLIES:
Electrical Tape (Item 21, Appendix E)
Shredder Bagger
WARNING
Death or serious injury may result from electrical shock unless shredder-bagger is turned off and
circuit breaker to shredder-bagger is off before removing equipment.
a.
Turn key switch off.
b.
Turn off circuit breaker for shredder-bagger.
c.
Lower roller on all four corners of machine by turning roller lowering bolts until rollers contact floor.
CAUTION
To prevent equipment damage, be sure that all four corner rollers contact the floor before
removing mounting bolts from air shocks.
Change 1
2-127
