TM 5-6675-315-14
e.
Disconnect wires from baling safety switch KS.
f.
Remove screws holding baling safety switch and lift out switch.
g.
Insert new baling safety switch KS and replace screws.
h.
Test position of baling safety switch KS and activator by lifting rear gate to vertical position. Check to be sure
activator closes switch without moving or pressing against switch housing.
i.
Reconnect wiring to baling safety switch KS according to wiring diagram.
j.
Remount spacer bushings and rear cover.
k.
Insert mounting screw through rear cover and spacer bushing. Retighten screws.
l.
Turn on circuit breaker.
m.
Turn on main power switch.
2-123
