TM 5-6675-315-14
e.
On right side of machine, locate adjustment nut behind V-belt pulley where conveyor belt shaft extends through
cutter mechanism gearbox.
WARNING
Keep hands away from cutter blades and drive pulley. Personnel injury may result.
NOTE
Conveyor is driven by slip clutch. If belt pulley turns, adjustment nut for clutch turns with it.
Turning adjustment nut to right tightens clutch.
f.
Turn on circuit breaker.
g.
Turn on main power switch.
h.
Test tightness by turning on machine and trying to stop conveyor belt with hand pressure. Clutch is properly
adjusted when belt moves smoothly without slipping but stops when firm hand pressure is applied. Loosen
setscrew and adjust nut until belt responds to test correctly.
i.
Tighten setscrew.
j.
Reinstall side panel.
2-87