TM 5-6675-315-14
2-16.5 Adjust Conveyor Clutch Drive.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
No. 2 Cross Tip Screwdriver
5 mm Hex Head Key Wrench
22 mm Combination Wrench
WARNING
Death or serious injury may occur from electrical shock unless power is turned off before
servicing.
a.
Turn off circuit breaker.
b.
Turn off main power switch.
c.
Remove screws holding bottom of right cutter side panels.
NOTE
Top of cutter mechanism side panels hang from a pair of brackets.
d.
Grasp cutter mechanism side panels at bottom and top. Remove cutter side panels by lifting straight up several
inches and then pulling away from machine.
2-86