TM 5-3610-287-24
3-11.
REPLACE AIR CONDITIONER/HEATERS (CONT)
WARNING
HEAVY EQUIPMENT. The air conditioner weighs 256 lbs
(116 kg). Use proper lifting device and stay clear of air
conditioner when lifting. Maintenance personnel must be
visible to hoist operator and in position to guide air
conditioner away from Section. Failure to observe this
warning may result in death or serious injury.
4.
Lift air conditioner/heater (16) with mounting plate (12) into
position on mounting bracket (13).
Remove sling (14) from front lifting handles (17).
5.
6.
Push air conditioner/heater (16) and mounting plate (12) into Section.
7.
Secure mounting plate (12) to mounting bracket (13) with hex bolts
(11), ground wire (19), lockwashers, and flatwashers.
8.
Remove sling (14) from rear lifting handles (15).
9.
Install drain tube (10).
10.
Install bezels (9) with screws (8).
WARNING
CHEMICAL HAZARD. Use silicone compound in a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
11.
Apply silicone compound to seams between air conditioner/heater (16)
and exterior bezels (9).
12.
Inside Section, install spray foam insulation.
13.
Install bezels (7) with screws (6).
14.
Install hex bolts (4), flatwashers, lockwashers, and nuts (5).
Install bellows (3) with screws (2) and lockwashers.
15.
16.
Connect power cable (1) to air conditioner/heater.
3-7
