TM 5-3610-287-24
3-11.
REPLACE AIR CONDITIONER/HEATERS (CONT)
9.
Remove hex bolts (11), lockwashers, and flatwashers securing air
conditioner/heater mounting plate (12) to mounting bracket (13).
Position heavy lifting device next to Section.
10.
11.
Connect sling (14) to hoist and rear lifting handles (15).
12.
Push air conditioner/heater (16) with mounting plate (12) out of
Section until front lifting handles (17) are exposed.
13.
Attach sling (14) to front lifting handles (17).
WARNING
HEAVY EQUIPMENT. The air conditioner weighs 256 lbs
(116 kg). Use proper lifting device and stay clear of air
conditioner when lifting. Maintenance personnel must be
visible to hoist operator and in position to guide air
conditioner away from Section. Failure to observe this
warning may result in death or serious injury.
14.
Lift air conditioner/heater (16) with mounting plate (12) from
mounting bracket (13) and lower to transport vehicle or ground.
15.
Remove hex bolts (18), ground wire (19), flatwashers, resilient mounts
(20), and mounting plate (12) from air conditioner/heater (16).
Remove copper fitting (21).
16.
17.
Remove sling (14).
INSTALLATION
1.
Attach sling (14) to new air conditioner/heater (16).
2.
Install copper fitting (21).
3.
Install mounting plate (12) with hex bolts (18), ground wire (19),
flatwashers, and resilient mounts (20).
3-6
