TM 5-3610-287-24
2-68.
REPAIR HANDWINCH (CONT)
WARNING
Cable must not be under load during the following
q
procedure. Attempting replacement of ring gear and reel
while cable is supporting folding floor may cause floor
to fall and cause serious personal injury.
Use care when handling end of cable. Frayed cable ends
q
are sharp and could puncture skin.
1.
Remove cable (1) from reel (2).
Remove hex bolts (3), spacers/washers (4), reel (2), and shaft (5).
2.
Separate ring gear (8) from
3.
Remove hex bolts (6) and nuts (7).
reel (2).
4.
Install new bushing (9) in new ring gear (8) on side opposite pins.
Install new bushing (9) in new reel (2) on side opposite ring
5.
gear (8).
Align pins in ring gear (8) with holes on reel (2). Secure ring gear
6.
(8) to reel (2) with hex bolts (6) and nuts (7).
7.
Install shaft (5) and spacers/washers (4) in reel (2).
8.
Install reel (2) in handwinch frame and secure with hex bolts (3).
9.
Install cable (1) on reel (2) as illustrated.
WARNING
Stay clear as folding floors are raised or lowered. Weight
of floors may cause serious injury.
10.
Test operate by raising and lowering folding floor.
2-215/(2-216 Blank)
