TM 5-3610-287-24
2-60.
REPAIR WALL HEATER (CONT)
WARNING
Grill may fall when last screw is removed. Failure to hold
grill with free hand may result in personal injury.
3.
Remove screws (2) and grill (3).
4.
Remove screws (4) and partially remove interior assembly (5).
5.
Tag and remove wires (6) from element assembly (7).
Remove keps nuts (8) and element assembly (7) from interior
6.
assembly (5).
7.
Remove hex nuts (9) and bolts (10) from element assembly (7).
Install bolts (10) and hex nuts (9) on new element assembly (7).
8.
9.
Install new element assembly (7) with keps nuts (8).
10.
Connect wires (6) to element assembly (7).
11.
Secure interior assembly (5) with screws (4).
12.
Install grill (3) with screws (2).
13.
Install control knob (1).
14.
Set HEATER circuit breaker to ON.
Test operate wall heater by turning control knob to right.
15.
FAN MOTOR
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Flat-tip screwdriver
Cross-tip screwdriver
Materials/Parts
208/240-volt motor, 42523-020-02
Masking tape (appendix C, item 29)
Lead pencil (appendix C, item 13)
2-189
