TM 5-3610-287-24
2-49. REPLACE POWER MONITOR ASSEMBLY (CONT)
WARNING
ELECTRICAL HAZARD. Main power cable MUST be disconnected
from Section before performing maintenance on power monitor
assembly. Wiring to power monitor assembly comes directly
from main power input receptacle. Failure to disconnect main
power cable WILL result in death or serious injury.
1.
Set MAIN POWER switch to OFF and disconnect power cable.
Remove hex bolts (1), lockwashers, and flatwashers. Rest power
2.
monitor assembly (2) on load center (3).
Remove wire ties (4).
3.
Desolder black (5), blue (6), and red (7) leads from rotary
4.
switch (8).
Remove hex nut (9), flatwasher , and white lead (10) from terminal (11)
5.
of voltage meter (12).
Remove power monitor assembly (2).
6.
2-148
