TM 5-3610-287-24
2-48. REPAIR POWER ENTRY PANEL ASSEMBLY (CONT)
WARNING
ELECTRICAL HAZARD. Turn off main power switch and
disconnect Section from power source before replacing
grounding lug. Failure to do so may result in death or
serious injury.
1. Set MAIN POWER switch to OFF and disconnect main power cable.
2.
Remove screws (1), lockwashers, flatwashers, and power entry panel
cover (2).
3.
Inside Section at grounding lug post (3), remove hex nut (4),
starwasher (5), three grounding cables (6), one grounding wire (7),
and starwasher (8).
2-146
