TM 5-3610-287-24
2-43.
REPLACE MAIN PUMP (CONT)
Connect wires (4) with wire nuts (5).
11.
12.
Install cover plate (3) with screws (1).
13.
Set WATER HEATER AND PUMP circuit breaker to ON.
14.
To test operate pump, fill water tank (TM 5-3610-287-10, para 2-6) and
check for leaks.
REPAIR WATER TANK ASSEMBLY
Water tank assembly is repaired by replacing: a. Immersion heater
b. Liquid level gage c. Remote reading thermometer d. Water tank
IMMERSION HEATER
INITIAL SETUP
Tools
Shop equipment common no. 1 tool kit (appendix B, section III, item 12)
Flat-tip screwdriver
Combination wrench set
Socket wrench set
Materials/Parts
Immersion heater, 13227E6258
Gasket, 13226E7973
PTFE tape (appendix C, item 30)
Masking tape (appendix C, item 29)
Lead pencil (appendix C, item 13)
Personnel Required
Utilities Equipment Repairer 52C10
Equipment Conditions
Water tank drained (TM 5-3610-287-10, para 2-7)
2-115
