TM 5-3610-287-24
REPLACE SINK TOP (CONT)
2-40.
WARNING
CHEMICAL HAZARD. Use silicone compound in a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
Seal back of sink top (14) with beads of silicone compound.
7.
Install remote reading thermometer (7) with screws (6).
8.
Install grommet (19) over temperature probe (2).
9.
Push temperature probe (2) through hole in sink top (14).
10.
Install clamps (5) with screws (4).
11.
12.
Insert grommet (19) in sink top (14).
WARNING
CHEMICAL HAZARD. Use silicone compound In a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
Slide B-nut (1) and ferrule (20) on probe (2). Apply silicone compound
13.
and install probe (2) in water tank (3).
Install faucet assembly (para 2-38).
14.
To test operate, fill water tank (TM 5-3610-287-10, para 2-6) and check
15.
for leaks.
REPLACE SINK CABINET
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools
Shop equipment common no. 1 tool kit (appendix B, section III, item 12)
Flat-tip screwdriver
Socket wrench set
Magnetic retrieving tool
2-104
