TM 5-3610-287-24
2-38. REPLACE FAUCET ASSEMBLY (CONT)
4.
Remove close brass nipples (4).
NOTE
If hex nut in following step cannot be removed because of
sealing agent, remove sink from sink cabinet (para 2-40).
5.
Remove hex nut (5) from faucet assembly (6).
Remove faucet assembly (6) from sink top.
6.
INSTALLATION
1.
Install new faucet assembly (6) in sink top.
NOTE
To prevent leakage, apply PTFE tape to all threaded water
pipe connections in the following steps.
2.
Install hex nut (5).
3.
Install close brass nipples (4).
4.
Install brass and plastic connectors (3).
5.
Install hoses (2) and secure clamps (1).
6.
Fill water tank (TM 5-3610-287-10, para 2-6).
7.
Set WATER HEATER AND PUMP circuit breaker and WATER PUMP switch to ON.
Test operate water system for leaks.
8.
2-39. REPAIR FAUCET ASSEMBLY
Faucet assembly is repaired by replacing: Replaceable seat
REPLACEABLE SEAT
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Adjustable wrench
Flat-tip screwdriver
2-98
