TM 5-3610-287-24
REPAIR GTO STORAGE CABINET ASSEMBLY (CONT)
2-37.
At left side of plate storage box (3), remove nuts (8), lockwashers,
6.
flatwashers, spacers (9), and hex bolts (10). Remove plate storage
box (3).
Remove nut (11), lockwasher, flatwashers, hex bolt (12), and magnifier
7.
light mounting bracket (2) from plate storage box (3).
Install magnifier light mounting bracket (2) with hex bolt (12),
8.
flatwashers, lockwasher , and nut (11) on new plate storage box (3).
NOTE
In the following steps, an extra person iS required to hold
plate storage box in position.
Install new plate storage box (3) with hex bolts (10), spacers (9),
9.
flatwashers, lockwashers, and nuts (8).
At bottom of plate storage box (3), install hex bolts (7),
10.
flatwashers, lockwashers, and nuts (6).
At left side of plate storage box (3), install hex bolts (5),
11.
flatwashers, lockwashers, and nuts (4).
Install top and bottom drawers in GTO storage cabinet.
12.
Install magnifier light (1) on mounting bracket (2).
13.
Turn wheel handknobs to raise GTO storage cabinet.
14.
BRACKET ASSEMBLY
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Socket wrench set
Combination wrench
Flat-tip screwdriver
Pliers
Materials/Parts
Bracket assembly, 13226E7867 (2 required)
2-93
