TM 5-3610-287-24
2-12. REPLACE EXTERNAL EXHAUST FAN HOUSING ASSEMBLY (CONT)
INSTALLATION
WARNING
CHEMICAL HAZARD. Use silicone compound in a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
1. Apply silicone compound to outer edges of external exhaust fan housing
assembly (3).
2.
Install external exhaust fan housing assembly (3) onto Section body (4)
with rivets (2). Wipe off excess silicone compound around edge of
housing.
Push brace (5) through slot in vent (6).
3.
4.
If necessary, paint external exhaust fan housing assembly in accordance
with TM 43-0139.
REPAIR EXTERNAL EXHAUST FAN HOUSING ASSEMBLY
External exhaust fan housing assembly is repaired by replacing:
a. Exhaust fan door b. Gaskets
EXHAUST FAN DOOR
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Portable electric drill
Twist drill set
Rivet gun (appendix B, section III, item 10)
Scraping knife (appendix B, section III, item 9)
Extension cord
Folding ladder
Materials/Parts
Exhaust fan door, 13225E3248
Rivet, MS20601-B8W6
Rivet, MS20470-AD37
Rivet, MS20470-AD38
Housing gasket, 13225E3266-1 (2 required)
Housing gasket, 13225E3266-2 (2 required)
Adhesive (appendix C, item 1)
2-36
