TM 5-3610-287-24
2-12.
REPLACE EXTERNAL EXHAUST FAN HOUSING ASSEMBLY (CONT)
REMOVAL
1.
Open exhaust fan door (1).
2.
Drill out seven rivets (2) securing external exhaust fan housing
assembly (3) to Section body (4).
3.
Pull brace (5) through vent (6) and remove external exhaust fan housing
assembly (3) from Section body (4).
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
Clean off residue with
4.
Scrape silicone compound from Section body.
rubber cement thinner.
2-35
