TM 5-3610-286-20
2-85.
Suction Head Assembly.
This task covers:
a. Remove
b. Install
c. Aline
INITIAL SETUP
Tools
Equipment Conditions
Feeler gage
Universal joint shaft removed (para. 2-84)
0.050 x 0.375 x 8 in. flat-tip screwdriver
Suction head valve housing removed
10 mm combination wrench
(TM 5-3610-286-10, para. 3-13)
a. Remove. (figure 2-236)
(1)
(2)
(3)
(4)
(5)
(6)
2-474
Loosen all hose clamps (1) and remove hoses (2).
Unscrew two screws (3) and one washer (4). Remove bracket (5), together with parts
assembled to it, from clamping piece (6), and remove clamping piece from tube (7).
Pull rubber disc (8) out of bottom of suction cup (9).
Remove suction cup (9) and spring (10) from spring guide (11).
Remove nut (12) and washer (13) and remove spring guide (11), washer (14), and lifting
guide (15).
Repeat steps 2 through 5 for components on opposite end of tube (7).
