TM 5-3610-286-20
2-85. Suction Head Assembly (cont).
b. Install. (figure 2-237)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
2-478
Install tapered pin (1).
Install bushing (2) in bottom of forward sucker casing (3).
Slide compression spring (4) onto forward sucker head (5). Install forward sucker head
with two cap screws (6) and two fiat washer (7).
Install nozzle (8).
insert forward sucker casing (3) into forward sucker bracket (9) so that slots and bolt
holes line up. Install cheese-head bolt (10) and nut (11).
insert shaft of knurled bolt (12) through slots in forward sucker bracket (9) and casing
(3). Install pinion gear (13) on end of shaft.
Install retainer (14) and two cap screws (15).
Slide components assembled in steps 1 through 7 onto rod (16). Install two socket-head
screws (17) and tighten.
Repeat steps 1 through 8 for components at opposite end of rod (16).
