TM 5-3610-286-20
2-85.
Suction Head Assembly (cont).
(7) Loosen two socket-head screws (1) and slide assembled components (2 through 16) off
rod (17).
(8)
(9)
(10)
(11)
(12)
(13)
(14)
2-476
Remove two cap screws (2) and retainer (3).
Remove pinion gear (4) from end of knurled bolt (5) and slide bolt out of forward sucker
bracket (6).
Remove cheese-head screw (7) and nut (8) and remove forward sucker casing (9),
together with parts assembled to it, from forward sucker bracket (6).
Remove nozzle (10).
Remove two cap screws (11) and two flat washers (12) and remove forward sucker head
(13), compression spring (14), and bushing (15).
Remove tapered pin (16).
Repeat steps 7 through 13 for components at opposite end of rod (17).
