TM 5-3610-286-20
2-73.
Deflector Assembly (cont).
c. Install. (figure 2-197)
(1) Install compression springs (1) in guide pieces (2) and (3).
(2) Install finger protection bars (4) in guide pieces (2) and (3).
(3) Install shaft (5) and spring tension pins (6).
(4) Install hex screw (7) and hex nut (8) in guide piece (2).
(5) Install spring rod assembly (9), roller (10), washer (11), and retaining ring (12) on snap
lever (13).
(6) Install snap lever (13) on shaft (5) and spring rod assembly on stud (14).
(7) Install spring tension pin (15), washer (16), and retaining ring (17).
(8) Install control lever (18), washer (19), and retaining ring (20).
(9) Install rod (21) and pin (22).
(10) Install spring retainer (23) and hex nut (24) on control lever (18).
(11) Install spring (25) on spring retainer (23).
(12) Install cover plate (26) and hex nut (27).
2-404
