TM 5-3610-286-20
2-72.
Spindle and Bearing Bolt Assembly (cont).
(2) Spindle and bearing bolt assembly. (figure 2-195)
(a) Install pin (1) in bearing bolt (2).
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(i)
(k)
(l)
(m)
Install bearing bolt (2) on press and replace tapered pin (3) and connecting
piece (4).
Install oil line (5) and tighten screw (6).
Install washer (7) and screw (8).
Install lock nut (9) on shouldered screw (10).
Aline shouldered screw (10) in bearing bolt (11) and replace two needle bushings (12)
and rivet-head pin (13).
Install threaded rod (14), position bearing bolt (11) on press and install tapered pin
(15) and connecting piece (16).
Install oil line (17) and tighten screw (18).
Install flat washer (19), Iockwasher (20), and two hex nuts (21).
Install sealed read sleeve (22) and threaded spindle (23).
Install scaled bushing (24) and spring tension pin (25).
Install conical washer (26), Iockwasher (27), and pan-head screw (28).
Position oil wiper plate (29) on press and replace two washers (30) and hex-head
screws (31).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install blanket cylinder drive gear (para. 2-75).
(2) Install upper guard (O/S) (para. 2-18).
(3) Install main guard (D/S) (para. 2-20).
2-400
