TM 5-3610-286-20
2-72.
Spindle and Bearing Bolt Assembly (cont).
b.
Repair.
(1) Repair worn or damaged needle bushings.
(2) Replace worn or damaged threaded bushings.
(3) Replace missing hardware.
c.
Install.
(1) Spindle and bearing bolt assembly (O/S). (figure 2-194)
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Install tapered pin (1) in bearing bolt (2).
Position bearing bolt (2) on press and install tapered pin (3).
Install washer (3) and screw (4).
Instaill lock nut (5) on shouldered screw (6).
Aline shouldered screw (6) in bearing bolt (7) and install two needle bushings (8)
and rivet-head pin (9).
Install threaded rod (10), position bearing bolt on press and replace tapered pin (11).
Replace lockwasher (12), fiat washer (13), and two hex nuts (14).
Replace scaled read sleeve (15) and threaded spindle (16).
Replace scaled bushing (17) and spring tension pin (18).
Replace threaded bushing, conicai washer (19), Iockwasher (20), and pan-head
screw (21).
Replace oil wiper plate (22) and nut (23).
2-398
