TM 5-3610-286-20
2-72.
Spindle and Bearing Bolt Assembly (cont).
(2) Spindle and bearing bolt assembly (O/S). (figure 2-193)
(a) Remove nut (1) and oil wiper plate (2).
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
Remove pan-head screw (3), Iockwasher (4), and conical washer (5).
Remove spring tension pin (6) and scaled bushing (7).
Remove scaled read sleeve (8) and threaded spindle (9).
Remove hex nuts (10), Iockwasher (11), and flat washer (12).
Remove tapered pin (13) and remove bearing bolt (14) and threaded rod (15).
Remove rivet-head pin (16), two needle bushings (17), and shouldered screw (18).
Remove lock nut (19) from shouldered screw (18).
Remove screw (20) and washer (21).
Remove tapered pin (22) and bearing bolt (23).
Remove tapered pin (24) from bearing bolt (23).
2-396
